Turboseparator

 Application and essential feature

Turboseparators are intended for the simultaneous re-discharge of waste paper mass after hydraulic breakers and its primary sorting from light and heavy inclusions that were not separated at the previous stages of its preparation.

The ring sieve of the device usually has the same perforation as the sieve of the hydraulic crusher. 

Waste paper mass enters the turboseparator under excess  through the nozzle and due to the rotation of the rotor with blades, intensive turbulent rotation and circulation to the center of the rotor is obtained inside the device. Due to this, the further dissolution of waste paper occurs, which was not fully implemented in the hydraulic breaker at the first stage of dissolution. In addition, the waste paper mass dissolved into individual fibers due to excess pressure passes through the holes  in the ring sieve located around the rotor and enters the receiving chamber of a good mass. Heavy inclusions due to the work on the counterflow of steam - the ring sieve - the rotor are thrown to the periphery of the device body and, moving along its wall, reach the end cover located opposite the rotor, fall into the mud collector, in which they are washed with circulating water and periodically removed.

 

Light small inclusions in the form of bark, pieces of wood, corks, cellophane, polyethylene, etc., which cannot be separated in a conventional hydraulic crusher, but can be crushed in pulsation and other similar type devices, are collected in the central part of the vortex mass flow and from there through a special the nozzle located in the central part of the end cap of the device is periodically removed.

 

Advantages  

 

• Heavy inclusions  are removed with a slight loss of fiber;
• Device  works in a continuous cleaning mode, due to which the throughput increases;
• Removal of large extraneous contaminants in this device eliminates the risk  formation of traffic jams with mass during subsequent work;
• The pollutant emission cycle can be controlled via the control panel. 

The main technical parameters of turboseparators with a drive - 1470 rpm.

 

Volume (M3)	PRODUCTIVITY, tons/day	Power (Kw)
7	0,5	25
9	1	35
12	2,3	55
13	3	75
12-15	4	75
15	4,5	90
15-18	6	132