4-color slotter printer with rotary die-cutting section, 2800x480

Box & Papers:

• Feed node

  Feed node

   

  Movement of each section:

  • Each module moves with the help of electricity, is equipped with signaling for the safety of operators;
  • Pneumatic blocking device;
  • System of starting protection by means of the main drive. If the machine is not ready for work, the current will not be supplied.

   

  Front edge feeding system:

  • The vacuum system, the ability to adjust the suction part, ensures fast and smooth feeding of sheets;
  • Roller feed mechanism with automatic leveling system, production - Taiwan;
  • Electronic adjustment of the side leveler;
  • Feed counter.

   

  Dust removal system

   

  Feed shafts:

  • The base is a rubberized steel tube, balancing;
  • The lower feed shaft is chrome-plated, diameter: 136 mm;
  • The gap between the shafts is regulated manually, the range is 1,2~10mm;

   

   

   
• Print node

  Print node

   

  Printing shaft:

  • Outer diameter Ø 480 mm;
  • Execution: steel, grinding, chrome plating;
  • Foot switch for clockwise and counterclockwise operation mode;
  • Balancing, stable work.

   

  Pinch shaft:

  • Outer thickness 18 mm;
  • Execution: steel, grinding, chrome plating;
  • Balancing, stable work;
  • Manual adjustment, range 1,2~10 mm.

   

  Upper and lower feed shafts:

  • Upper shaft: seamless steel tube, has 2 paper feed wheels;
  • Bottom shaft: seamlessth steelth pipesа, polishing, chrome coating;
  • Manual adjustment, range 1,2~10 mm.

   

  Steel raster shaft (ceramic optional):

  • Outer thickness 18 mm;
  • Execution: steel, grinding, chrome plating;
  • Balancing, stable work;
  • Shaft cells in accordance with the customer's requirements: the number of cells of the 1st group is 220, 2nd, 3rd, 4th groups - 240;
  • Pneumatic automatic shaft lifting system (when stopped, the shaft rises);
  • The design makes it easier and faster to wash the shaft.

   

  Rubber shaft:

  • Steel base;
  • Balancing, stable work.

   

  Setting system:

  • Planetary transmission system;
  • Electronic digital adjustment of printing parameters, control system (both during operation and when stopped);
  • Manual horizontal adjustment, ±7,5 mm.

   

  Paint circulation:

  • Pneumatic paint supply pump, stable operation;
  • The filter, removal system is dirty.

   

  Pneumatic brake

   

   
• Slotter

  Slotter

   

  Key Features:

  • Computer setup.
  • Shaft adjustment mechanism.
  • Possibility of manual adjustment of positioning.

   

  Double Slotter:

  • The width of the knives is 7 mm.
  • Knives made of alloy steel, undergo heat treatment.

   

  Device for cutting holes:

  • Optionally.

   

  Start and end of work:

  • A self-closing mechanism with manual adjustment provides easy and quick access.
  • The slotter is equipped with an emergency stop system that ensures operator safety.

   

   
• Cutting unit

  Cutting unit

   

  Features:

  • Accurate adjustment of the punch-bearing shaft allows you to extend the operational life of rubber parts.
  • A device for grinding rubber parts is installed on the machine, which extends the service life of the shaft.

   

  Stamp bearing shaft:

  • Ø 360 mm (with rubber lining Ø 408 mm).
  • Execution: alloy steel, polished and chrome-plated surface.
  • Distances between holes for stamps: 100x55 mm
  • The thickness of the base of the stamp: 16 mm (3-layer corrugated cardboard), 13 mm (5-layer corrugated cardboard).
  • Equipped with a scrap removal system.

   

  Upper rubberized shaft:

  • The base is alloy steel, chrome-plated.
  • Thickness of the rubber layer: 10 mm, width: 250 mm.
  • Manual adjustment of the clamp.
  • Horizontal movement ±40 mm.
  • The automatic compensation system allows you to maintain the accuracy of work after grinding the rubber layer.

   

   
• Gears

  Gears

   

  The main drive gear:

  • High-quality alloy steel.
  • Stable operation, low noise level, hardness HRC58~62, long service life, ensures stable printing accuracy.

   

  The connecting ring of the shaft and the reducer ensures smooth and precise operation at a higher torque. Easy installation, easy maintenance.