Fluting and Test-liner production plant. Paper machine with a cutting width of 2540 mm. Weight of manufactured products: 80-250 g/m².

 Brief technical characteristics:

• Weight of products produced: 80-250 g / mXNUMX;
• Width of paper on a roll: 2540 mm;
• Productivity: 75 tons / day;
• Raw materials used: Waste paper;
• The machine is working.  

General description and composition:

Mass preparation  department for 2 streams. 

• 1 hydraulic breaker, volume 20 m3;

• 1 hydraulic breaker, volume 16 m3;

• 1 Mass cleaner of high concentration, manufactured by VOITH, type S;

• 1 Seperplast manufactured by Maule, type GR3 with a capacity of 100 t/day; 

• 1 Pressure sorter manufactured by STM (vertical); 

• 1 Mill (conical) produced by RCM, type R50 (97 kW); 

• 1 Mill (disc) manufactured by AGA, typ 18" (60 kW);

• 1 Mill (disc) manufactured by RCM, type 21";

• 1 Deflacker firm Escher Wyss type  E1;

• 1 ≠ production Finck (area 1,5 m2);

• Large pools, All pumps and piping.

Permanent part of the machine:

• 1 Mass cleaner of high concentration, typ D200 / 4;

• Mass production pump Robuschi, type RN250/315. Throughput capacity 720 m3/h.;

• 1 Production pressure sorter  Lamort (vertical), typ  SP700 ; 

• 1 pressure sorter;

• UVK system, flow 2000 l/min.

Paper machine 

Formation section contains: 9 hydroplanks; 12 vacuum hydroplanks; Vacuum pump  Azmec, type AL40; Gauch shaft OVER (diameter 810 mm, surface width 2600 mm+vacuum pump  Azmec, type  AL40, Cloth 22,42 m x 2750 mm; drive (CC 176 kW) with reducer

Pressure box open type  ABOUT US, Lip width 2670 mm.

Press part contains:

• 1st Press, Shafts with a working surface width of 2750 mm, Shaft diameters of 500 mm. Occasion  75 kW;

• 2nd Press, Shafts with a working surface width of 2750 mm, Shaft diameters of 800 mm. Occasion  115 kW. the press was installed in 2002;

 

Dryer part and new cap installed and rebuilt in 2001.

• 1st group, 4 drying cylinders with a diameter of 1500 mm. With a working surface width of 2600 mm. Working pressure 3 bar;

• 2nd group, 11 drying cylinders with a diameter of 1500 mm. With a working surface width of 2600 mm. Working pressure 3 bar;

• Yankee cylinder with a diameter of 3800 mm. With a working surface width of 2750 mm. Working pressure 3 bar;

• 3rd group, 3 drying cylinders with a diameter of 1500 mm. With a working surface width of 2600 mm. Working pressure 3 bar

 Calender with NIP shaft, with a working surface width of 2600 mm, shaft diameters of 520-380 mm.

Nakat ирина 2600 .

PRS  Neyret Beyler. Width 2600 mm. Speed ​​400 m/min. The diameter of the roll is 1300 mm.

CMV control and regulation system.

Steam system, heat recovery system.

Steam generation system - Steam boiler  BONO, type SG1000. Capacity 10 tons/hour, installed in 2011.

Vacuum department

Water treatment and water purification equipment  WTO Collared.

 

Spare parts and Consumables. 

 

 

 

Contact us at info@epikurgroup.com for technical documentation in Russian