Complete factory for the production of Fluting and Test liner. Two-grid paper machine with a width of 2560 mm. Weight: 105 - 240g/m2. Made by Metso.

Brief description and composition:

Mass training department:

Hydraulic breakers:

• Hydraulic breaker No. 1, volume 27 m3, together with a conveyor  and cleaning equipment (Secondary hydraulic breaker, Trommel, Cleaner of high concentration mass, Sorting, Seperplast)
• Hydraulic breaker No. 2, volume 27 m3, together with a conveyor  and cleaning equipment (Secondary hydraulic breaker, Trommel, Cleaner of high concentration mass, Sorting, Seperplast)
• Hydraulic breaker No. 3, volume 27 m3, together with a conveyor.
• Hydraulic breaker No. 4, volume 27 m3, together with a conveyor.

Pressure sorting:

• 2 Sorting of 1st degree cleaning, models UVF 600 and UVF 300.
• 1 Sorting of cleaning 2 degree, models F 40.
• 1 Sorting of cleaning 3 degrees, models UVF 300.

Equipment for processing spoiled goods:

• 1 Sorting, model C 24
• 2 Mass cleaner of low concentration.
• 1 Arc sieve
• 1 Thickener manufactured by MAULE
• 1 Disperser
• 2 Black-Clawson Mill
• 1 Conflo type mill
• 1 Mill produced by PILAO.

Permanent part of the machine 

Top Grid:

• 3-step COC system manufactured by COMER
• 1 Pressure sorting UVF 500 (gap 0,35 mm)
• 1 Pressure sorting HB1 (gap 0,30 mm)
• Fat pumps.

Bottom grid:

• 4-step system of KOK manufactured by PALMAC
• 1 SELECTIFIER `V30 pressure sorting (gap 0,25 mm)
• 1 Pressure sorting MODUSCREEN HB1 (gap 0,25 mm)
• 1 Pressure sorting  (gap 0,25 mm)
• 1 Pressure sorting MODUSCREEN HB2 (hole 0,25 mm)
• Fat pumps.

Paper machine:

Pressure box manufactured by Optiflo, lip width 2820 mm, (Automatic adjustment)

 Pressure box manufactured by Symflo, lip width 2820 mm, (Automatic adjustment)

Mesh part console type , length 12600 mm, execution - stainless steel.

Gauch shaft, diameter 714 mm, width 2820 mm

The press part of the trinip SYNBELT type contains:  

• Suction press, shaft diameter 740 mm
• Sympress shaft diameter 1022 mm
• Shoe press shaft diameter 1250 mm and 1100 mm

Dryness after the press part: 50 - 51%.

The composition of the drying part:

• 57 drying cylinders with a diameter of 1500 mm and a width of 2900 mm. Working pressure 9 bar
• Vac Roll aspiration system
• Tail shooter system
• Closed cap with heat recovery system
• Siemens sectional drive
• Central lubrication system (10000 liters)

Automatic rolling produced by Metso, year of manufacture: 2002. Max. winding diameter: 3000 mm.

Voith quality control system and web tension control system.

Siemens sectional drive

ПРС manufactured by Metso Valmet Wymdrum, year of manufacture: 2002. Max. speed: 2300 m/min. Automatic positioning of knives. Sleeve cutting machine production Corelink.

Control system Siemens S7

A complete set of water treatment and water treatment equipment.

Boiler and steam generator. 

The equipment is in excellent condition. Lots of spare parts.

Contact us at info@epikurgroup.com for technical documentation in Russian