A complete factory for the production of Fluting and Test-liner. Two-grid paper machine with a width of 2550 mm. Weight: 90 - 150g/m2. Manufacturer Carcano / Valmet.

Brief description and composition:

Mass training department for 2 streams. Needs modernization.

• 2 hydraulic breakers, volume 18 m3;
• 3 Purifiers of mass of high concentration, throughput capacity of each 3600 l/min.;
• 3 seperplasts manufactured by Maule; 
• Deflaker;
• Mass pools, all pumps, pipelines.

Permanent part of the machine

Paper machine

The wet part was modernized in 2000-2001, pressure boxes were installed, the mesh part

Valmet mesh top. Width 2900 mm. Execution - stainless steel.

• Chest shaft with a diameter of 520 mm. Mesh rotary shaft with a diameter of 520 mm. Drive shaft with a diameter of 600 mm. Net guide shaft with a diameter of 282 mm. 
• Pressure box produced by Comer, lip width 2750 mm.

The lower mesh part of the company Valmet. Width 2900 mm. Execution - stainless steel.

• Chest shaft with a diameter of 520 mm. Mesh rotary shaft with a diameter of 520 mm. Gauch shaft with a diameter of 820 mm. Net guide shaft with a diameter of 282 mm.
• Pressure box produced by Comer, lip width 2750 mm.

The press part was modernized in 2000. Dryness after the press part is 47%.

• Suction press with a shaft on a "pickup" scale, shaft diameter 730 mm. INestablished in 2001.
• Press with a shaft diameter of 660 mm.
• Press on the scale "jumbo" with a shaft diameter of 1100 mm. INestablished in 2011.

Drying part and cap.  

• 23 drying cylinders with a diameter of 1500 mm. Working pressure 5 bar.

Roller bearings, central lubrication system and cap installed in 2001.

Roll made by Carcano.

PRS manufactured by Bruderaus - October replacement. 

Scanner manufactured by TGS.

Wrapper of rolls in film.

Steam system, heat recovery system and hood manufactured by Lario Energy.

• The steam-condensing system was installed in 2005.
• The cap was installed in 2005-2016.

Steam generation system.

• The Pelucchi steam boiler was installed in 2007. Productivity 3 tons/hour.
• Thermal steam boiler. Productivity 8 tons/hour.

Vacuum department of Azmec production.

The total vacuum is 375 cubic meters per minute.

• 3 vacuum pumps, model AL/65.
• 1 vacuum pump, model AL/50.
• 2 vacuum pumps, model AL/40.

Electrical equipment

• Fully sectional AC drive with editors and motors.

Water treatment equipment.

Laboratory.

Overhead cranes.

Equipment of the workshop with some machines

Spare parts and Consumables. 

Spare shaft for Jumbo press, press shaft, cloth and more. 

 

 

 

Contact us at info@epikurgroup.com for technical documentation in Russian