Applicator for gluing double-sided adhesive tape.
0316. New equipment
The equipment is made to order. It is installed on the line of multi-point gluing.
The applicator is designed for applying two-sided adhesive tapes to both flat cardboard and corrugated cardboard of any thickness. It is installed on the line of multi-point gluing and is connected to the control of the glue application system.
The applicator is intended for drawing two-sided adhesive tape both on a flat cardboard, and on a corrugated cardboard of any thickness. It is installed on the line of multipoint gluing and is connected to management of system of drawing glue.
Technical characteristics:
- Work speed up to 100 meters per minute;
- The minimum length of the tape is 30 mm.;
- The maximum length is limited by the parameters of the installed adhesive system;
- The internal mounting diameter of the coil is 76 mm.;
- The outer diameter of the tape is up to 420 mm;
- The width of the tape is from 10 to 25 mm.;
Connection:
- Compressed air: 6 kg/cm²;
- Management: 12/24 volts. Depending on the type of adhesive system.
Cost and production time upon request.
Our specialists can install on the line and adjust this equipment.
Media
Image Gallery
https://epikurgroup.com/spetsialnoe-predlozhenie/item/1016-0316-double-sided-tape-applicator#sigProGalleriaf39ac3e379